Mots-clés
Ensemble de joints d'étanchéités Pour cylindre télescopique 12 tonnes
Ensemble de joints d'étanchéités Pour cylindre télescopique 7 tonnes
Hydroworks Contrôle monobloc 1 section avec retour detente
Hydroworks Contrôle directionel monobloc 1 section avec détente pour moteur gaz Mono-block contruction og high tensil strength gray cast iron Load check on each spool Hard chrome plated spool Differential poppet style relief, adjustable from 1,500 to 3,500PSI, relief preset at 2,100PSI Power beyond and closed center capability Float spool, motor spool is...
Hydrauworks Contrôle fendeuse avec retour neutre Entré : 10 SAE Sortie : 8 SAE
Hydroworks Contrôle monobloc 1 section A & B standard
Hydroworks Contrôle monobloc 2 sections Spool type 1st/2nd/3rd : 4-Way/4-pos 4-Way/3-pos Spool action 1st/2nd/3rd : Float Detent at 4th position on 1st Spool Spring Center to neutral from either work position I/O Port : ¾” NPT Working Port : ½” NPT Flow Rate : 15 GPM Working Pressure : 3,500 PSI Weight : 26.0 lbs (11.8 kg)
Hydroworks Contrôle monobloc 3 sections Spool type 1st/2nd/3rd : 4-Way/4-pos , 4-Way/3-pos , 4-Way/3-pos Spool action 1st/2nd/3rd : Float Detent at 4th position on 1st Spool / Spring Center to neutral from either work position / Spring Center to neutral from either work position I/O Port : ¾” NPT Working Port : ½” NPT Flow Rate : 30 GPM Working Pressure...
Hydroworks Controle monobloc 4 sections Mono-block contruction og high tensil strength gray cast iron Load check on each spool Hard chrome plated spool Differential poppet style relief, adjustable from 1,500 to 3,500PSI, relief preset at 2,100PSI Débit : 12 gallons Power beyond and closed center capability Float spool, motor spool is available
Hydro-Works Contrôleur de débit Débit : 0 à 16 gpm Sortie : 1/2" NPT
Hydro-Works Contrôleur de débit Débit : 0 à 30 gpm Sortie : 3/4" NPT
Adaptateur 90° mâle ORB-08 x Femelle NPT-08
Support de boîte pour cylindre télescopique Capacité : 7 tonnes Quincaillerie incluse
Support de boîte pour cylindre télescopique Capacité : 12 tonnes Quincaillerie incluses
Support de base pour cylindre télescopique Capacité : 7-12 tonnes "H" Beam avec pine
Moteur hydraulique pour chargeur à bois • Gal./min: 51• Max. work pressure: 250 BAR• Déplacement: 193 CM³• Couple: 450 NM• Max. axial load static: 10 KN• Max. axial load dynamic: 5 KN
Valve à débit hydraulique ajustable 15 GPM 1/2 NPT Pression de travail : 3,500 psi
Valve à débit hydraulique ajustable 30 GPM 3/4 NPT
Indicateur de niveau d'huile avec thermomètre Aluminium
Bouchon ventilé Filtre 40 micron Gasket et boulons
Moteur électrique 220 volts AC Ampère : 16 Hertz : 60 RPM : 3400 Pour unité hydraulique